Water Meter Firmware

Firmware Water Meter PRO

Firmware for Water Meter PRO. Use only on devices showing firmware prefix WS2.

Firmware download

NON PROCEDERE SENZA PRIMA AVER FATTO QUESTA VERIFICA.
This firmware is for devices with prefix WS2. Check that the firmware update page shows the “WS2” prefix. If the prefix is not “WS2” but “WS”, download the Water Meter PRO Legacy firmware from the pageFirmware Water Meter WS. If the device malfunctions because the wrong firmware was selected, it will not be repaired under warranty.

Firmware

WS2-1.1.0.bin

  • Nuovo in Impostazioni Relay: Range Mode introduced.
  • The relay switches when the threshold is reached and its status is maintained until the opposite threshold is reached.
  • To enable Range Mode, enable both the minimum and maximum thresholds and enable the “Range Mode” option.
  • By default the behaviour is MIN: ON / MAX: OFF, but it can be inverted by selecting MIN: OFF / MAX: ON.

MD5: 5e07dcb5b45cadf2849fa71265aaa500